Installing off road lights?

[Road_devil]

I've just bought the lights and I plan to install them this weekend. Any short instruction from you guyz would be helpful.

[porscheval]

Using off road lights is a good way to improve your visibility, especially if you have a plan to spend the night in the wilderness. You can install them at just about anywhere, including the roof rack, roll bar and the bumper. However, if you do this improperly, the electricity can cause a serious hazard to the driver and the passenger.

First of all, you should decide on the are you want to mount them and drill holes on the correct place.

WIth the supplied nuts, mount the light securely on the recently drilled holes. The next step is to connect the black and red wires, make sure these wires don't rub on this, especially sharp edges. COnnect those wires to the battery from the toggle switch, but never mix polarity. Remember black is negative and red is positive.

When testing the lights, you should aim them at a flat wall to see whether they're straight and evenly arranged. You should be aware that your state may require the lights to be covered while you're on the road. So check the regulation. When deciding on the location of the lights, make sure that they won't be damaged by low-hanging trees or large rock boulders in the future.